Progressive Hardware - Latch Protectorsa

LATCH PROTECTORS FOR OUT-SWINGING DOORS

#1033SL	#1077SL	#1033 - 3" x 11" Latch Guard Massive wrought steel or solid brass, fits key-in-knob or mortise locks. Complete with carriage bolts, acorn nuts and washers. Individually poly bagged with hanging header. Packed 12 per box. Available finishes: Silver or Duro Bake Coat on Steel, Brass Plated Steel or Solid Brass.
		#1077 - 2 5/8" x 12" Offset Latch Guard Heavy 1/8" steel. 1/4" offset, 1 1/8" backset, 1 7/16" cylinder hole. Protects both latch or bolt. Reversible. Supplied with carriage bolts, acorn nuts and washers. Packed 12 per box.
#1077WO	#1088	#1077WO - 2 5/8" x 12" Offset Latch Guard. This plate is the same as the #1077 above but without the cylinder hole. Packed 12 per box. Available finishes: Silver or Duro Bake Coat.
		#1088 - 2 5/8" x 7" Offset Latch Guard Heavy 1/8" steel. 1/4" offset, 1 1/8" backset, 1 7/16" cylinder hole. Protects latch or bolt. Reversible. Supplied with carriage bolts, acorn nuts and washers. Packed 12 per box. Available finishes: Silver or Duro Bake Coat.
#1088WO	#1099	#1088WO - 2 5/8" x 7" Latch Guard This plate is the same as the #1088 above but without the cylinder hole. Packed 12 per box. Available finishes: Silver or duro bake coat.
		#1099 - 2 5/8" x 7" Offset Latch Guard 1/8" thick steel plate with cutout for up to 3 1/2" rose. 1/4" offset. For deadbolt or key-in-knob latchsets. Packed 12 per box. Available finishes: Silver or duro bake coat.

LATCH PROTECTORS FOR IN-SWINGING DOORS

#DG13KB	13" w / knob cut-out	#DG30MORT	30" w / mortise cut-out
#DG13MORT	13" w / mortise cut-out	#DG30MED	30" w / Medeco cut-out
#DG13MED	13" w / Medeco cut-out	#DG30UN	30" w / no cut-out
#DG13UN	13" w / no cut-out	#DG90UN	90" w / no cut-out
#DG30KB	30" w / knob cut-out
13" Door guardian cut-outs are centered. 30" Door Guardian cut-outs must be ordered as "Left hand", "Right hand" or "Centered". All 90" Door Guardians are with no cut-out.